LogoNav Bar NCHRP 350 Press Releases Company History Catalog Request Customer Service Product Page Home Outside Sales Online Store

TrafFix Vertical Panel™

Certification • TrafFix Vertical Panel Barricades™ consist of durable blow molded polyethylene panels and recycled rubber bases.
• To assemble, simply "Step-n-Lock" the vertical panel into the base. No heavy rings or bases that must be lifted over the top of the panel.
• For transportation and storage, both the panels and bases can be easily separated and stacked.
• The panel separates from the base when impacted by a vehicle.
• The panel face is recessed to minimize abrasions and scratches to the expensive reflective sheeting. If severly damaged the reflective sheeting can be replaced.
• The bases are made from 100% recycled rubber and weigh either 28 or 43lbs.

TrafFix Vertical Panel
30000 Series


stop for pedestrians
24" x 12" Vertical Panel
24" x 8" Vertical Panel State Law Panel
34000 Series
36" x 8" TrafFix Vertical Panel Barricade™ Stop for Pedestrians with 28lb. recycled rubber base
33000 Series
24" x 12" TrafFix Vertical Panel Barricade™ with light and 43lb. recycled rubber base
34000 Series
24" x 8" TrafFix Vertical Panel Barricade™ with light and 43lb. recycled rubber base

 

33136-LDG43
36" x 12" TrafFix Vertical Panel Barricade™ State Law Yield to Pedestrians Within Crosswalk meets MUTCD Standard
no parking school crossing

Messages and Legends
A wide variety of messages and legends can be printed on one or two sides of the panel. Engineer, high performance or diamond grade refelctive sheeting is available. Ideal for parking lots, schools, churches, or in-plant applications.

Step-n-Lock panel

Step-n-Lock Panel
Six locking buttons are molded into the panel and correspond to six matching recesses molded in the base. Simply step down on the foot hole to lock the panel in place. The Step-n-Lock design ensures the panel will remain vertically locked in place and "square to traffic." Panel sizes, messages and legend can be intermixed with either the 28lb. or 43lb. base.

rubber base

Rubber Base
Made from 100% recycled rubber, the base incorporates two easy-grip carrying handles. A vulcanized rubber center section provides reinforcement from wear and tear due to panel separation. On the under side of the base, there are four raised anti-rotational foot pads to minimize movement from wind, or turbulence from passing vehicles.

Download
Vertical Panel PDF

© Copyright 1998- 2009 TrafFix Devices, Inc.