Little Buster Sign Stand

Little Buster Sign Stand is designed to hold 30", 36" and 48" aluminum, wood, plastic or roll-up signs. All steel contruction with powder coated paint to resist rusting. Telescoping mast with adjustable rigid or roll-up sign brackets allow for variable sign height adjustments. Dual spring mounted base for added stability during high winds. Step-n-Drop legs enable you to set-up in seconds without having to bend over or stoop down. A two-position leg adjustment allows all four legs to be individually adjusted for eneven terrain. Flag holder will accept 3/4" diameter wooden or plastic dowel flags.

24000 SERIES

Little Buster sign stand
with 48"x 48" rigid sign and two flags

Little Buster Sign Stand
folds for compact storage

Part # 24018-RSB

Now you can be assured you are in compliance with NCHRP-350 regulations when using .080 aluminum signs. Just specify the Little Buster Sign Stand with Safe Sleeve-350 Rigid Sign Bracket (Part# 24018-SSB), to meet the stringent NCHRP-350 standards.
		Little Buster Sign Stand with Safe Sleeve-350 Bracket for use with .080 aluminum signs Part # 24018-SSB	Rigid Sign Safe Sleeve-350 Bracket Part # 24350

Instructions for Doing the TrafFix Two-Step

1) Simply position
the Little Buster
stand with
Step-n-Drop legs
so the Sign Side
label is facing
oncoming traffic.

2) Place right foot
on both release
levers located
between the legs
and step down.
Both legs will
fall to the ground.

3) Walk to the other
side of the Little
Buster stand, place
your left foot on both
release levers and
step down. The
remaining two legs
will fall to the ground.

4) Once all four legs
are firmly on the
ground, pull up on
the mast to lock
legs in place. Now
youknow how to do
the TrafFix Two-Step.