Phoenix Sign Stand

Phoenix Sign Stand

Tested and certified to meet the crashworthy requirements of NCHRP-350

Phoenix Sign Stand with two different size signs

Phoenix Sign Stand with
48" x 48" .080 aluminum sign,
advance warning light and two flags

At last, a simple and easy way, to mount signs that are different in size and shape to ONE sign stand!

• Designed with a pre-drilled square upright to accommodate hole patterns found in most size signs.
• Raise and lower signs anywhere along the six-foot long upright for more flexibility.
• NCHRP-350 approved, with a 48" x 48" .080 aluminum sign, as well as other size signs with an optional barricade light and flags.
• Recycled rubber base with steel plate firmly grips the road surface, while presenting a narrow profile.
• Two Phoenix Sign Stands can also be used to support barricade panels to create a type III barricade.

Actual size of upright is 6' in length

Part # 90018

The Phoenix Sign Stand consists of four components

• 6' long pre-drilled square upright
• Steel Base Plate

• Recycled rubber base
• Steel locking pin

Ease and flexibility come to mind when assembling the Phoenix Sign Stand. Simply place the pre-assembled recycled rubber base and steel base plate on the ground and insert the square upright into to center opening and secure it with the steel locking pin. Once this is complete, you can attach a multitude of sign configurations to the Phoenix Sign Stand. Each individual component can be replaced if damaged.

Stacking lugs

Anti-skid foot pads

This top view of the recycled rubber base, and top of the steel base plate (visible in center), illustrates how they stack. The four stacking lugs are located in each corner of the base and help hold sand bags in place during windy conditions. Together, the rubber base and steel plate weigh 40lbs.

This bottom view of the recycled rubber base, with the steel base plate (visible in the center), illustrates the four anti-skid foot pads that help keep the Phoenix Sign Stand properly oriented toward oncoming traffic. Two molded in carrying handlsa rea located on either side of the base.

Once the recycled rubber base and steel plate are assembled, they can virtually remain together until you decide to reparate the two pieces. The stacking lugs allow the bases to nest together while taking up very little space on the truck or in storage.

Click here to download Configuration Guide PDF
Sign Guide PDF