Enviro-Cone

The MUTCD Compliant Enviro-Cone is 80% recycled by weight and can be recycled again if the cone is destroyed. If ever a stem becomes unusable, simply reorder the stem and reuse the base, no need to buy the entire cone! With more than 50% of the Enviro-Cone being made of recycled materials, it qualifies for Green Points.

Enviro-Cone is made in the USA
The Envrio-Cone is Made In America; this means a reliable, consistent, and sustainable source of supply for distributors and users throughout North America. Manufactured from low density polyethylene, which provides superior cold weather performance and increases the life span of the Enviro-Cone. The Enviro-Cone does not crack or break down to -45°F (-42.78°C). Even in the hottest weather, the Enviro-Cone stands tall and vertical. No more soft and droopy cones in hot weather! The Enviro-Cone provides long term durability with excellent color retention through the use of UV Stabilizers and low density polyethylene plastic.


Cold Test

Heat Test

With its patented Easy Grip Groove handle, the Enviro-Cone provides excellent "gription" for quick deployment and retrieval. The grove makes tying off caution tape quick and easy.

Stability Improvement - Tipping Point Comparison

PVC Cone vs. Enviro-Cone
Type Weight Tipping Angle Weight Distribution
PVC Cone 10 lb. 45° Base: 60%
Stem: 40%
7 lb. 55°
Enviro-Cone 7 lb. 76° Base: 80%
Stem: 20%

Stability

Visibility

Durability

Enviro-Cone during impact
Unlike PVC cones, the Enviro-Cone is designed to withstand an impact with most vehicle tires.
No ripped or torn PVC, simply reshape the cone to reuse
No ripped or torn PVC! Simply reshape the Enviro-Cone stem with your hands and then...
Once shaped, drop the base over the reformed stem and the Enviro-Cone is back to working condition
Drop the base over the reformed cone stem and the Enviro-Cone is can be put back on the job.

Specification

Orange/Lime traffic cone is 18", 28", or 36" in height and has a total weight of 3, 7, 10, or 12 lbs. ± ¼ lb. Stem of the cone is molded from LDPE to provide superior cold/hot weather performance, excellent 100% UV resistance/color retention, and superior impact performance. Base of the cone is molded from recyclable rubber and makes up 80% of the total weight. Dimensions of the base are 15 ¾" × 15 ¾". The cone base is removable so that the stem can be replaced if either part becomes damaged. The cone base will lock onto the cone stem with molded-in locking lugs. The stem of the cone is designed with recessed areas for reflective collars and a groove near the top of the cone for easy gription. Tipping angle of the cone is no less than 76° from vertical. The entire Enviro-Cone product, cone stem and base, is made in the USA.

Documents